Set individual days, weekdays, weekends, or full-week combinations.

Connect the green or bare copper wire from the wall box to the GREEN wire on the timer.

Press until "1 OFF" is displayed, then repeat the process to set the time the device should turn OFF .

If you have specific issues, checking the manufacturer's provided is recommended for more troubleshooting steps.

The primary interface consists of several buttons, typically including: , Minute , Day (or Clock ), Prog (Program), and an On-Off switch or button. Additionally, there may be secondary functions like RDM (random mode) and DST (daylight saving time), often accessed by holding down certain buttons.

Internal rechargeable NiMH battery saves your settings during power outages.

If you tell me what you specifically need (e.g., programming steps, troubleshooting, reset procedure), I can write a or troubleshooting section in paper format. Would that work?

Internal rechargeable NiMH battery (retains programs during power outages) Minimum Time Setting: 1 minute Operating Temperature: 32°F (0°C) to 131°F (55°C) 2. Safety Precautions & Installation Instructions Safety Warnings

Press the button to select the exact same days as you did for 1 ON .