Huawei Lual02 Firmware Flash File Mt6735m Dead Hang Logo Done Repack !exclusive! Jun 2026

Follow these steps precisely to restore your dead or hanging Huawei LUA-L02. Step 1: Install MTK Drivers Extract the downloaded MTK USB Driver package on your PC.

Select “IMEI”, load the repack’s database (if provided), input IMEI from phone’s back sticker.

The preloader file failed to handshake with the processor.

| Error | Solution | |-------|----------| | BROM ERROR: S_FT_ENABLE_DRAM_FAIL | Bad preloader → flash using test points or force BROM mode (short CLK/GND) | | STATUS_EXT_RAM_EXCEPTION | Wrong repack → use LUA-L02 specific custom_emmc.txt | | Hang at logo after flash | Flash userdata + cache from repack; or replace logo.bin | | Device not detected | Install MT65xx Preloader VCOM drivers (disable driver signature on Win10) | Follow these steps precisely to restore your dead

Because the MT6735M uses a proprietary boot ROM (BootROM) over USB (VCOM port), you need:

Change the flashing dropdown from "Download Only" to "Firmware Upgrade".

: Install these on your PC so it can recognize the phone in "Preloader" mode SP Flash Tool : The official utility for MediaTek firmware flashing Huawei LUA-L02 Stock ROM The preloader file failed to handshake with the processor

For a hanging logo, use the or Firmware Upgrade mode.

Use version v5.1612 or newer to ensure MT6735M compatibility.

: Download the official SP Flash Tool (Smart Phone Flash Tool) v5.x series, optimized for stable write sequences on MTK processors. Use version v5

Contained within the firmware folder (e.g., MT6735M_Android_scatter.txt ).

Before beginning the flashing process, gather all necessary tools and prepare your computer environment to avoid errors like SP Flash Tool Error 2005 or 5054. A working Windows PC (Windows 10 or 11 preferred). A high-quality, reliable USB data cable.