The controller features physical terminals mapped to distinct monitoring, power, and relay switching systems:
applications, designed to start your generator automatically the moment it detects a power anomaly.
The C/k ratio is the most critical manual setting on the Lovato 31 RGAM 12. Setting it incorrectly will cause either over-cycling (hunting) or non-responsiveness.
Connect the alternator output phases so the controller knows when the generator has reached the correct voltage and frequency. Control Outputs: Start: Connects to the starter motor relay. Fuel: Connects to the fuel stop-solenoid.
Green LED illuminates when the alternator produces stable voltage and frequency.
The Lovato 31 RGAM 12 features built-in diagnostics that display specific error codes when system anomalies occur. Error Codes and Solutions
Features a 3-digit LED display for readings (voltage, frequency, battery, hours) and 16 status LEDs. Remote Monitoring:
: It monitors three-phase mains voltage and single-phase generator voltage and frequency. It also tracks battery voltage, engine speed (RPM), oil pressure, temperature, and fuel levels.
: If a "Starting Failure" (A04) occurs, the unit halts attempts and displays the alarm, requiring a manual reset.
To maximize the lifespan of your power factor correction system, execute the following maintenance tasks every six months:
Follow the terminal diagram provided on the side of the unit to connect the battery supply, mains inputs, generator inputs, and relay outputs.
What specific is the unit experiencing? Are you using this with a diesel or gasoline generator?
If you are using floppy disks: Close all applications. Insert the first disk (1) into drive A : Start the setup program by double- СВ Альтера Engine and generator controllers