Maintenance Box Resetter For Epson L6170 Jun 2026

The box contains an absorbent pad that soaks up the waste ink. Over time, this pad becomes saturated. Epson printers use a built-in counter to track how much waste ink has been collected. When the counter reaches its predetermined limit, the printer stops working altogether and displays a message indicating that the maintenance box is full or has reached the end of its service life.

#EpsonL6170 #PrinterMaintenance #T04D1 #EcoTank #PrinterRepair #TechTips How to Use the Chip Resetter Using a resetter for the maintenance box is a simple physical process: Remove the Box:

Advanced versions of the resetter feature auto-detection. They can recognize the current status of the chip and only send the reset signal when necessary, protecting the chip from damage.

Press the resetter firmly against the chip. A red light will typically blink and then turn , indicating a successful reset. Reinstall: maintenance box resetter for epson l6170

Throwing away perfectly intact plastic housings contributes to electronic waste. Enter the Maintenance Box Resetter

A single chip resetter costs roughly the same as one original Epson T04D1 maintenance box but can be used dozens of times.

The Epson L6170 uses a specific type of maintenance box often referenced by the part numbers , T04D100 , T04D1 , or EWMB2 — all of which are compatible with the L6170. The box contains an absorbent pad that soaks

Run the utility. You will need to purchase a reset key from the developer to activate the reset function for your specific printer model.

: If you are in the middle of a big print job and the printer locks up, a resetter provides an immediate solution without waiting for a replacement part to ship. Important Precautions

Use a flathead or Phillips screwdriver to loosen the single retaining screw. Slide off the plastic cover. Gently pull the maintenance box straight out of its slot. Step 3: Manage the Physical Waste Ink When the counter reaches its predetermined limit, the

: Once the box is re-slid into its slot, the printer's LCD screen will show the maintenance box as empty, allowing printing to resume immediately. Key Options for Your Epson L6170

A maintenance box resetter (often called a chip resetter) is a small, handheld plastic device equipped with several metal pins and a battery-powered internal circuit.

Power down the machine completely before handling any internal hardware components.