Mikrotik L2tp Server Setup Full [best] -

The PPP profile links the VPN clients to the IP pool and defines the server's own VPN IP address.

/ip ipsec identity add peer=vpn-profile auth-method=pre-shared-key secret=YourStrongPSKHere generate-policy=port-strict

The profile defines how the connection behaves, including DNS settings and local addresses. Go to > Profiles . Click + to add a new profile. General Tab : Name: l2tp-profile . mikrotik l2tp server setup full

Change DNS Server if necessary (e.g., 8.8.8.8 or your internal DNS). Click and OK . Part 3: Enable L2TP Server Now, we activate the L2TP service on the router. Go to PPP > Interface . Click L2TP Server . Enabled : Check this box. Default Profile : Select l2tp-profile . Authentication : Check mschap2 (recommended).

You now have a fully functioning L2TP/IPsec VPN server on MikroTik. This setup provides secure remote access for any device that supports L2TP/IPsec with pre-shared key. For production environments, consider migrating to IKEv2 or WireGuard for better performance and modern cryptography, but L2TP remains widely compatible and easy to deploy. The PPP profile links the VPN clients to

A site-to-site L2TP connection is created by configuring one router as the (following the steps above) and another as an L2TP Client . The key difference is in the client router's configuration. On the client router, you would:

Navigate to (or CLI):

/ppp active print

/ip firewall nat add chain=srcnat src-address=192.168.100.0/24 action=masquerade comment="VPN NAT" Click + to add a new profile