Earlier versions of laser software often struggled with "flickering" or inconsistent power levels when engraving grayscale images (raster engraving). V1.1.2 generally includes improved algorithms for power modulation (PWM), allowing for smoother gradients and more accurate shading in photographs.
User interfaces in open-source or hardware-bundled software can be utilitarian. The V1.1.2 update usually polishes the layout, making the buttons for "Frame" (previewing the work area) and "Start" more distinct, reducing the risk of accidental misfires.
: Use dedicated software like LaserGRBL or LightBurn for advanced photo-to-G-code processing, relying on the MKS tool primarily for configuration and firmware updates.
Most MKS boards use the . You must install the CH340 USB driver before your computer can recognize the motherboard. Run as Administrator: Mks Laser Tool Setup V1.1.2.exe Download
: You can check makerbase.com.cn for the most current version under their download or support section. A note in the Two Trees documentation suggests that the linked URL https://makerbase.com.cn/en/mkslaser/ provides access to the MKSLaser software ecosystem.
If Windows Defender displays a "SmartScreen" warning, click and then Run Anyway (common for unsigned open-source hardware utilities). Complete the on-screen wizard to finish the installation. Step 3: Establish a Board Connection Launch the software.
The software serves as a bridge between your computer and the laser controller for several technical tasks: Earlier versions of laser software often struggled with
Once you have downloaded the .exe file, follow these steps to install the tool on your computer:
: Look for “MKSLaser” in the Apple App Store.
If you need the absolute latest build, however, you may want to consider a more recent release. LONGER recommends when dealing with newer routers, because the factory‑provided V1.1.2 sometimes does not work correctly with modern network hardware. More on that later. The V1
The “MKS NC Tool” can add position preview code to G‑code files exported from LaserGRBL. This improves the control board’s reading speed when performing edge‑stroking (outline scanning) functions.
CH340 or CP2102 USB-to-UART drivers must be installed on your PC for the software to recognize the MKS board via a USB cable.