Ws6906 Software Upgrade: Satlink

: This is the specialized PC-side application used to "talk" to the meter.

Before attempting any upgrade, you must understand that there are of the SATLINK WS6906 on the market. The firmware from the first version is incompatible with the newer device.

The WS-6906 uses an RS232-to-3.5mm jack cable. If your computer lacks a native serial port, use a high-quality USB-to-RS232 adapter with reliable drivers (such as Prolific or FTDI chipsets). satlink ws6906 software upgrade

Satellite technology is constantly evolving. A firmware update on the WS6906 typically brings critical improvements that go beyond just fixing bugs, often making the difference between a frustrating installation and a perfect signal lock.

: You can also use to edit or "Write Parameters" to update only the satellite and transponder lists without changing the core firmware. Calibration : The : This is the specialized PC-side application used

Typically an executable file named Upgrade.exe or STK_Upgrade.exe .

As one user explained, manual addition works well if you already have a motorized system using USALS, but you must confirm the channels after scanning to ensure you are on the right bird. The WS-6906 uses an RS232-to-3

Ensure the RS-232 driver is correctly installed on your computer. Try switching the COM port number to a lower one (e.g., COM1 or COM2) in Device Manager.

Note the assigned port number (e.g., COM3 ). If the number is higher than COM4 , right-click the device, go to -> Port Settings -> Advanced , and change it to an open port between COM1 and COM4 . Step 5: Execute the Firmware Flash

Select the exact COM port number noted from Device Manager.

Right-click the Windows Start button and select . Expand the Ports (COM & LPT) section.