Only fly in large, wide-open outdoor spaces away from crowds, power lines, and trees.
Skyrex Drone Manual: The Ultimate Guide to Setup, Flight, and Troubleshooting Introduction
| Frequency | Task | | :--- | :--- | | | Wipe motor shafts with a microfiber cloth. Remove dust from VPS camera. | | Every 10 flights | Use the included screwdriver to tighten all arm hinge screws. | | Every 50 flights | Replace propellers (even if they look fine – micro-fatigue is invisible). | | Every 6 months | Send the battery to Skyrex for a health check (free under warranty). | skyrex drone manual
Pushing up climbs in altitude; pulling down descends. Pushing left or right rotates (yaws) the drone on its vertical axis.
Press and hold the drone's power button until the body LEDs flash rapidly. Only fly in large, wide-open outdoor spaces away
Scan the QR code located on the retail box to download the official (available for iOS and Android).
Calibration aligns the internal sensors and ensures stable hovering. Linking the Drone and Remote Place the drone on a flat, level surface. | | Every 10 flights | Use the
The LED lights on the battery will flash sequentially during charging. A solid, non-flashing display indicates a 100% full charge.
Note: Since “Skyrex” is a generic brand name used by various OEMs, this manual is a representative template. Always refer to your specific model’s included booklet.
The Skyrex drone utilizes standard Mode 2 controller configurations by default, which assigns the throttle to the left hand and directional movement to the right hand.
Allow batteries to cool down for 10 minutes after a flight before recharging.