Unscrew the plastic covers around the ignition barrel. 🕹️ Phase 2: Center Console and Trim Clear the "face" of the dashboard to reveal hidden bolts.
This updated guide provides a clear, safety-first walkthrough to help you complete the job without breaking brittle plastic clips or damaging electrical components. Safety First and Essential Tools
Grab the dash from the bottom. Lift slightly upward and then pull toward the seats.
The lower center console frames the gear shifter and connects directly to the main dashboard structure. vw polo 6n dashboard removal updated
The VW Polo 6N dashboard is held by structural screws inside the cabin and critical bolts accessed from the engine bay plenum chamber. Cabin Structural Screws
Remove the screws located inside the instrument cluster cavity and behind the central radio frame.
10mm for battery and internal bolts; large socket for the steering wheel nut. Unscrew the plastic covers around the ignition barrel
With the help of a second person, lift the dashboard up and out through the passenger door. Pro-Tips for Reassembly
: Pry off the small trim piece directly below the cluster to expose two T20 Torx screws. Remove these screws and gently pull the cluster forward. Use a flat-head screwdriver to release the pink locking tab on the blue wiring connector.
This is the most time-consuming phase.
Remove the steering wheel airbag and the steering wheel itself.
Remove the plastic cowl (two screws on the underside). Unscrew the T20 bolts holding the cluster, pull it forward, and release the multi-pin connectors.
There are several reasons why you might need to remove the dashboard from your VW Polo 6N. Here are a few common scenarios: Safety First and Essential Tools Grab the dash
Set the wheels straight to ensure the steering wheel and clock spring are aligned for reinstallation. 2. Center Console & Trim