Woodzig Model 40268 is an electric pole pruner commonly used for overhead branch trimming. While the manufacturer (formerly under the Oregon/Blount brand family) has phased out certain legacy lines, you can still maintain and operate the tool safely with this updated guide based on current best practices for Woodzig units. 1. Assembly & Chain Installation Remove Tensioner Plate: Unscrew the tensioner plate screw and remove the plate. Chain Direction:
In cold weather, dilute guide bar chain oil with 25% kerosene or diesel. 4. Frequently Asked Questions (FAQ)
: Integrated cassette mechanism housing a proprietary loop chain. woodzig model 40268 manual updated
“This isn’t just a typo correction,” says Hannah Voss, Senior Technical Writer at Woodzig. “We discovered that 12% of support tickets for the 40268 were related to misinterpretations of the old feed rate chart. The new manual directly addresses those pain points and aligns the safety section with updated CE and UL standards.”
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Woodzig model 40268 manual Woodzig Model 40268 is an electric pole pruner
Lay the chain out in a loop, ensuring the cutting edges of the teeth face the (forward along the top of the bar).
Specialized 15-inch Fiskars/Woodzig replacement saw blades are available. contact customer support immediately.
Ensure the cutting edge of the chain faces towards the tip of the hook. Tensioning the Chain:
Verify that the chain teeth point forward on top and inward toward the driver. Replace with a fresh Oregon Cutting Systems cassette. Loose tensioner plate or worn driver tooth
Before starting, please verify that all parts are included. If any items are missing, contact customer support immediately.